The waste oil desulfurization refining machine can quickly remove water and sulfide in oil. The oil it can process includes: waste engine oil, tire oil, plastic oil, bunker oil, and the processed oil will eventually become clean yellow diesel. our desulfurization extraction equipment can reduce the sulfur content of the oil to 80-100ppm.
Waste tyre plastic pyrolysis oil desulfurization refining machine
The waste oil refining plant can recycle the waste oil into yellow base oil, which can not only effectively remove impurities, water, acids, organic acids and inorganic acids, but also remove carbon particulate matter and peroxide. In gasoline/diesel oil, asphalt and colloids and other sludge can be similarly removed, and the color can be changed to gold to remove odors.
Features and Advantage:
- PLC or DCS fully-automatic and continuous process
- Around 0.5% Chemical consumption,the chemical additives can be recoverd and reused again and again,and the additive is highly active even in normal pressure and temperature.
- Compared with hydrogenation technology,YANGJIANG’s desulfurization technology has significant advantages in terms of effectiveness, economy and safety.
- The liquid desulfurization and denitrogenation chemical can quickly dissolve the suspended solids in the oil to obtain a clear and transparent product oil, which can be recycled indefinitely;
- Zero pollution, No oil-bearing waste sludge in the whole process.
- With a 100% recovery rate, the final oil output is essentially split into two parts: light-colored, low-sulfur and low-nitrogen product oil and dark-colored sulfur-rich and nitrogen-rich oil, with negligible oil loss.
- The sulfur can be reduced to less than 10ppm, which can meet the Euro VI standard and can be directly used for vehicles.
Oil can be used in many different products, and this is because of its composition of many different hydrocarbons of different sizes, which are individually useful in different ways due to their different properties. The purpose of a refinery is to separate and purify these different components. Most refinery products can be grouped into three classes: Light distillates (liquefied petroleum gas, naphtha, and gasoline), middle distillates (kerosene and diesel), and heavy distillates (fuel oil, lubricating oil, waxes, and tar). While all of these products are familiar to consumers, some of them may have gained fame under their refined forms. Cracking is a petroleum refining process in which heavy-molecular weight hydrocarbons are broken up into light hydrocarbon molecules by the application of heat and pressure, with or without the use of catalysts, to derive a variety of fuel products. Cracking is one of the principal ways in which used oil is converted into useful fuels such as motor gasoline, diesel fuel and home heating oil. Cracking breaks carbon-carbon bonds to turn heavier hydrocarbons into lighter ones. This can occur thermally (as occurs during the petroleum formation process beneath the earth) or through the action of a catalyst.
We add desulfuration chemical, after distilling by our machine, the sulfur will be reduced to 300-800ppm, then our solvent extraction machine to reduce the sulfur to 50-100ppm. The diesel oil distillation machine also can change color, remove odor, reduce 75%-80% sulfur from tyre oil and plastic oil.
Waste tyre/plastic pyrolysis oil distillation plant
Our waste tyre/plastic pyrolysis oil distillation plant can further refine the waste tyre pyrolysis oil, waste plastic pyrolysis oil as well as waste lubricating oil into diesel-like fuel.
As we know, black pollution and white pollution are a headache problem commonly facing by each area of the world. At the same time, oil resources are decreasing every day. But is there a way that can effectively solve this problem?
company owns very good technologies and products. We use green technology (pyrolysis and distillation) to recycle waste to oil resources. We use the pyrolysis technology to get crude oil from waste tire/plastic, and then refine the crude oil into diesel fuel with the distillation technology, which could better solve the oil resources decreasing problem while disposing of the waste. This process is just realized by our waste tyre/plastic pyrolysis plant and waste tyre/plastic pyrolysis oil distillation plant.
Waste tyre plastic turned into diesel
To get diesel like fuel, the waste oil distillation plant is necessary. Here I’d like to mainly introduce our waste tyre/plastic pyrolysis oil distillation plant. Take 10tpd waste tyre/plastic pyrolysis oil distillation plant for example.
Technological process of 10TPD waste tyre/plastic pyrolysis oil distillation plant
Distillation reactor→(high temperature distillation, long chain hydrocarbon break down)→condenser→distillation oil temporary storage tank→catalyst reactor(distillation oil decoloring+de-odoring)→oil filtering device→finished oil(diesel oil)→oil storage tank.
10T/D waste tyre/plastic pyrolysis oil distillation plant is mainly composed of 4 reactors, cooling system, vacuum system, filtering system and de-dusting system. Our oil distillation plant can refine waste tire/plastic pyrolysis oil into diesel very efficiently, and at the moment it is the most efficient waste oil refinery equipment in the market, because our distillation reactor works with fast heating system.
Advantages of waste tyre/plastic pyrolysis oil distillation plant:
1.After 7 years’ research and development, our distillation technology is already mature.
2.Can refine 3 kinds of oil–waste tire pyrolysis oil, plastic pyrolysis oil and waste lubricating oil.
3.With fast heating system, the distillation process become more efficient and takes shorter time.
4.Four step purifying process ensure final diesel pure and high quality
Technical parameter of waste tyre/plastic pyrolysis oil distillation plant
| Items | Contents |
| Model | DY-5t, DY-10t, DY-20t, DY-50t… |
| Raw material | tyre/plastic pyrolysis oil, waste lubricating oil |
| Structure form | Vertical (easy cleaning and maintenance) |
| Heating method | Indirect heating to prolong the machine service life |
| Operating pressure | Constant pressure |
| Heating material | Coal, charcoal, fuel gas, fuel oil |
| Average out-put oil rate | 95% |
| Material of reactor | 4 reactor with different material |
| Thickness of reactor | 18mm |
| Mode of cooling | Recycled water cooling |
| Power in total | 20 Kw |
| Service life | average 7 years |
| Land area | 180㎡ |
Waste oil to diesel distillation plant product introduction
Waste oil to diesel distillation plant can be used for refining crude oil, waste oil, pyrolysis oil, used engine oil into qualified diesel oil, and the diesel oil can be used in engine and generators. The waste oil to diesel distillation plant not only brings more benefits for us, but also protects the environment.
If someone asks what the most valuable resource in the world is, oil resource is the best answer without doubt. That is means person who owns oil resource will owns wealth. So people have researched and developed waste tyre/plastic pyrolysis plant converting waste tyre/plastic to fuel oil . But purity and color of tyre/plastic oil cannot meet the standard for cars, and it cannot be used for cars directly. On the other hand, there are many waste oil appeared due to an increasing of all kinds of vehicles , such as waste motor oil, used engine oil and lubricating oil. So distillation technology is emerged.
The environment can be protected from pollutants caused by combustion plants by using this waste oil to diesel plant. About two people are only required to operate on this machine. It has alkaline composite catalyst where all the harmful substances in used oil are treated to produce high quality refined oil without any discoloration. It operates under low energy consumption rate.
Waste oil to diesel distillation plant working process
- Prepare waste oil(waste plastic oil ,waste tire oil ,used motor oil ,used engine oil )
- Heating for distillation
- Cooling
- Chemical process for cleaning the distillation oil
- Collect final diesel product