Project of Waste Aluminum Plastic Pyrolysis Plant,Compared with the traditional incineration and landfill treatment, the pyrolytic waste aluminum plastics have the characteristics of large processing capacity, high economic benefit and small environmental pollution. It can not only recycle high value-added products, but also has high economic and environmental benefits..
Waste Aluminum Plastic Pyrolysis Plant
With the gradual development of industry, aluminum and plastic materials have gradually increased. Its appearance has greatly facilitated human life, but aluminum plastics are also difficult to degrade naturally, these resources need to be processed manually. A large amount of waste aluminum and plastics is expensive to purify and process, and burns to pollute the air. The ideal disposal method is to use environmentally friendly aluminum and plastic pyrolysis machine to process through high temperature pyrolysis to achieve the purpose of recycling.
The aluminum and plastic pyrolysis machine uses the principle of pyrolysis to convert waste aluminum and plastic into fuel oil, combustible gas, aluminum slag and other energy sources in a high temperature and oxygen-free environment. In addition to core components such as reactors and condensers, the machine is also equipped with environmental protection and safety equipment such as exhaust gas purification system, desulfurization tower, water seal, vacuum device, etc.
Aluminum and plastic pyrolysis machine working flow
- Feed
Fully automatic continuous equipment is used to transport waste aluminum and plastics to the reactor, and the entire process is sealed to ensure safety and environmental protection.
- High temperature pyrolysis
When the reactor is heated, the waste aluminum and plastics will be pyrolyzed under high temperature and oxygen-free conditions, oil and gas will be generated after reaching a certain temperature.
- Cooling
The oil gas passes through the vertical condenser and the horizontal condenser in turn through the buffer of the buffer tank, then the oil gas is condensed into oil under the action of low temperature cooling.
- Exhaust gas purification
After passing through the condensing system, the non-condensable oil and gas can be used as fuel to heat the reactor through the tail gas purification system.
- Deslagging
After the oil and gas are exhausted, the continuous aluminum and plastic pyrolysis machine will automatically discharge the remaining aluminum and plastic slag in the furnace and collect it in a sealed manner.
- Flue gas treatment
The flue gas generated during the heating process of the reactor enters the desulfurization tower for purification, it can be discharged into the atmosphere in accordance with the national environmental protection emission standard.
Special insulation layer with good insulation effect
The main reactor is made of standard boiler steel
Compact feeding, fast feeding speed, capable of high-temperature feeding
Carbon black unload by high temperature is cooled in this reactor and stored after reaching a certain temperature
The uniquely designed box type condenser enjoy good cooling effect and easy to clean.
Non condensable combustible gas recycle system safely recycling waste gas into the combustion chamber to burn to save fuel
Purify the exhaust gas generated by combustion and discharge it after meeting the emission standards.
Characteristics of aluminum and plastic pyrolysis machine
1.Automatic pressure relief device, which automatically releases pressure when the pressure exceeds the limit value due to operational negligence
2.The non condensable gas purification and recycle system removes acidic gases and small amounts of oil substances through purification tanks. The purified non condensable gas is poked into the combustion chamber of the reactor for heating after passing through a water sealed tank. The water sealed tank can separate oil and gas, prevent the back-flow of combustible gases, and ensure the safe operation of the equipment
3.Perfect gas seal saves fuel
High-temperature flue gas flows through the channel between the fixed furnace shell and the rotating furnace liner, and achieves heat transfer with the material through the furnace liner wall.
Adopting a groove shaped pressure control structure and heat-resistant flexible packing sealing technology, reducing the entry of external cold air into the channel, saving energy, and improving thermal efficiency.
4.The unique design of the condenser prevents water pollution discharge, and the cooling water is recycled to save water consumption.
5.Pyrolysis reactor adopts gear transmission, and the front and rear wheel belts and supporting wheels are forged or cast parts that have undergone heat treatment to increase compressive and wear resistance
6.Variable frequency speed regulation for pyrolysis furnace; The speed of the reducer motor can be adjusted
7.Automatic anti coking technology adopts a combination of scraper cleaning device and thermal conductive spherical beads to prevent coking in the furnace.
8.Fully enclosed feeding and slag discharge system is used to achieve high-temperature feeding and slag discharge. Combined with a carbon black cooling furnace, continuous production of equipment is achieved, with fast production speed and high efficiency.
Aluminum and plastic pyrolysis machine is a key factor in determining whether you are profitable, so choosing a good machine will do more with lewith less. Doing’s waste aluminum and plastic pyrolysis machine has a high degree of automation, high oil yield, and can handle products of various scales. The quality has been recognized and trusted by more than 90 countries and regions around the world. Our factory has a complete set of complete and advanced prototype, welcome to visit and inspect at any time.