Small pigeon feed pellet machine belongs to a small feed pellet machine, which is a feed processing machine that directly presses particles of corn, peas, barley, mung beans, hemp seeds, buckwheat, etc.

Small pigeon feed pellet making machine

Introduction to Small Pigeon Feed Granulator

Pigeon feed pellet machine belongs to a small feed pellet machine, which is a feed processing machinery that directly presses pellets from crushed materials such as corn, peas, barley, mung beans, hemp seeds, buckwheat, etc.

Scope of application for small pigeon feed pellet machine

Pigeon feed pellet machine, suitable for large, medium, and small pigeon breeding, used by breeders or large, medium, and small feed processing plants.

Characteristics of small pigeon feed pellet machine

• Simple structure, wide adaptability, small footprint, and low noise.
• Powdered feed and grass powder can be granulated without the need for or with a small amount of liquid addition, so the moisture content of pellet feed is basically the same as that of the material before granulation, which is more conducive to storage.
• Dry material processing produces feed pellets with high hardness, smooth surface, and internal maturation, which can improve the digestion and absorption of nutrients.
• The process of particle formation can cause denaturation of trypsin resistance factors in grains and beans, reducing adverse effects on digestion, killing various parasitic eggs and other pathogenic microorganisms, and reducing various parasitic and digestive system diseases.

Use and maintenance of small scale pigeon feed pellet machine

• Before using this machine, first check whether the screws of each part are fastened
• Loosen the two adjusting bolts on both ends of the pressure roller before starting up, then start the motor, and observe whether the rotation of the machine is the same as the logo
• Under normal production conditions, the pressure roller bearing must be cleaned with diesel or gasoline every five days, and high-speed lubricating oil must be injected at the same time. The gearbox is repaired and maintained every six months, and the vertical shaft bearing is cleaned every 7 days.
• Pigeons and thrushes are common breeding birds in life. The use of pellet feed is very beneficial to the healthy growth of birds. -Specially launched a bird feed pellet machine, suitable for the use of various bird breeding.
• The length of the pellets can be adjusted to the up and down position of the cutter above the discharge port.
• The pellet machine is stopped. Stop feeding before stopping. After the material in the silo is processed, add oily material into the stencil hole to keep the hole lubricated so that it will not be blocked next time.
• Tighten the two pressure wheel adjusting screws (the gap between the pressure wheel fish template is 0.1—0.3mm), then turn on the machine, and then feed and grind, and grind repeatedly until the stencil hole is smooth and all the materials are discharged. After stopping the machine, punch out the remaining material in the template hole with steel nails.