The small goose feed pellet machine is mainly suitable for rural breeding professionals, small breeding farms, and rabbit farms. Granulation of coarse fibers such as sawdust, rice husks, cotton stalks, cottonseed hulls, weeds, and various types of crop straw, household waste, and factory waste, as well as granulation of materials with low adhesion and difficult to shape. It can also be applied to low-temperature granulation of biological bacterial fertilizers, organic fertilizers, compound fertilizers, etc.

Small scale diesel engine goose feed pellet machine

Goose feed pellet machine:
1) The machine is manufactured with a special process, the surface of the machined particles is smooth, the hardness is moderate, and the particle size can be changed and adjusted at will. The inside of the feed pellets reaches half-cooked degree, which can not only gelatinize starch and coagulate protein, improve the nutritional quality of feed, facilitate digestion and absorption, but also can kill common pathogenic bacteria and parasites. By adjusting the compression ratio of the mold, the pelletizing temperature can be reduced, and low-temperature materials such as feed, organic fertilizer, compound fertilizer, and biological bacterial fertilizer can be pelletized. The water content of the granulation is about 13%, and the temperature is naturally cooled without cooling.

2) The machine is composed of a motor, a drive shaft transmission device, a flat die, a press wheel, a feed hopper, a cutter, and a discharge hopper.

3) The pellet feed machine is based on mechanical circular motion. The diesel motor drives the drive shaft, transfers the gear to the main shaft and the template, so that the template rubs the pressure wheel and rotates. Under the pressurized pressure wheel, the material will move from Extrude from the template hole, and roll out the particles from the discharge port through the segment of the cutter.

Machine feature of Small scale diesel engine goose feed pellet machine

1. Simple structure, wide applicability, small footprint, and low noise.
2. Powdered feed and grass powder can be granulated without (or with a small amount of) liquid addition. Therefore, the moisture content of pellet feed is basically the moisture content of the material before granulation, which is more conducive to storage.
3. The particles made by this machine have high hardness, smooth surface, and sufficient internal maturation, which can improve the digestion and absorption of nutrients and kill general pathogenic microorganisms and parasites. They are suitable for raising rabbits, fish, ducks, and experimental animals, and can achieve higher economic benefits than mixed powdered feed.
4. This model is equipped with more than 20 aperture molds, which can adapt to granulation of different materials and achieve the best results.
5. Adapt to different materials to ensure effective compression. The compression molding of wood chips, corn stalks, and other materials requires a lot of pressure. In similar granulation equipment, the roller component is the central component of the entire equipment, and high-quality alloy steel is used to improve the service life of the roller.