The steam generator uses high-quality parts: the pressure controller uses imported Denmark, the instrument valve, the electrical appliance uses the most well-known brand in China, the use of safe and reliable, luxurious configuration. Multiple interlocking safety protection functions: the product is equipped with safety valve, pressure controller, overpressure protection, overtemperature, to prevent the steam generator from being damaged due to excessive pressure; At the same time, it has the limit low water level protection, and the steam generator will automatically stop working when the water supply stops, which prevents the dry burning of the steam generator from causing damage or even burning of the electric heating element.
Coal oil biomass wood electric fired steam boiler generator manufacturer
The steam generator produced by the company is a three-return fire tube heating type gas steam generator. Multi-layer heating surface is arranged in the equipment, and after improvement, the external water level electrode is connected to control the external insulation material, and then the stainless steel shell is covered. The appearance is clean and beautiful. After the user purchases, it can be used after connecting the power supply and water source. This product has the highest degree of automation, personalized design, the most advanced programs are concentrated on one button, and the extraordinary fool fuzzy control is convenient for each operator.
LCD display automatic intelligent electronic control system:
The steam generator operating system is fully automatic control, and the running status can be clearly seen in the LCD screen. You can observe the steam generator working status, steam generator water level status, steam pressure high and low status, pump operating status, fault alarm status, etc., so that you can master the steam generator operating status and use more assured.
Model number | LHS0.2-0.09 | LHS0.3-0.09 | LHS0.5-0.09 | LHS0.7-0.09 | LHS1.0-0.09 | |
Rated evaporation capacity(t/h) | 110 | 110 | 110 | 110 | 110 | |
Rated working pressure(Mpa) | 0.09 | 0.09 | 0.09 | 0.09 | 0.09 | |
Rated steam temperature(°C) | 110 | 110 | 110 | 110 | 110 | |
Rated feed water temperature | 20°C | 20°C | 20°C | 20°C | 20°C | |
Thermal efficiency(%) | 80-93 | 80-93 | 80-93 | 80-93 | 80-93 | |
Biomass fuel consumption(Kg/h) | 45 | 60 | 110 | 160 | 210 | |
Applicable power supply(AC) | 380V 50HZ | |||||
Suitable fuel | Coal , oil , gas , biomass , Wood ,electric | |||||
Combustion mode | Micro-positive pressure combustion | |||||
Regulation mode | Auto | |||||
annotation | The above fuel consumption is for reference only, and the biomass particles are calculated at 4500Kac/h 2. Biomass burning requires the installation of biomass burner and biomass extinguishing base |
Products are strictly debugging before leaving the factory, users only need to connect the power and water installation, press the button to start the steam generator can enter the automatic operation state, without complicated installation.
1, time setting function, so that the boiler in the set time to start and stop.
2, overheat protection: when the water temperature in the boiler, the burner is automatically prohibited from working and the alarm is generated.
3, secondary overheating protection: when the temperature of the boiler shell exceeds 105 ° C, the secondary circuit is automatically cut off, and the automatic reset is normal.
4, real-time monitoring of water level: boiler low water level cut off the burner to achieve protection.
5, the user can set the water supply temperature of the boiler according to the needs of the load to reduce the operating cost.
6, the inlet/outlet temperature display function is more convenient to grasp the operating status of the boiler and the system.