Automatic reciprocating pulp moulding egg tray production line, fast return on investment, cost-effective! Sold worldwide for more than 20 years, for hundreds of enterprises to win the market successfully. Mainly suitable for the production of egg trays, egg cartons, fruit trays, beverage cup trays, bottle trays and other low products with more regular shapes.

Automatic reciprocating pulp moulding egg tray production line

A variety of sophisticated technologies are being used in manufacturing Pulp Tableware Machine, Pulp Molding Machinery, Egg Tray Machine, Pulp Molding Production Line.With the improvement of product performance, its application ranges have been broadened as well. So far, it has been proved to be used in the field(s) of Paper Product Making Machinery.

● Sold worldwide for more than 20 years, for hundreds of enterprises to successfully win a broad market;
● Excellent performance of rotary drum forming technology;
● Matching large 6-layer drying line, high efficiency and energy saving;
● Mechanical or servo drive, direct or indirect drying;
● The product has large strength and little deformation, and is a worry-free choice for fitting automatic makeup eggs.

Consumption table of egg tray production line

There are so many different egg carton machine molded pulp machine egg carton making machine products for different age groups and budgets. egg carton machine molded pulp machine egg carton making machine attaches great importance to technological innovation in the research and development process.

Working Process of pulp moulding egg tray production line

Equipment process flow

Auxiliary packaging of finished products
(1) Automatic stacking machine
(2) Baler
(3) Transfer conveyor

Pulping system
(1) Put the raw materials into the pulping machine and add the appropriate amount of water after a long time to stir the waste paper into pulp and then put it into the pulp storage tank for storage.
(2) The pulp in the pulp storage tank is put into the pulp mixing tank, the pulp concentration is adjusted in the pulp mixing tank, and the white water of the return tank and the thick pulp of the pulp storage tank are further stirred by the homogenizer. Adjust to suitable pulp and put into the pulp supply tank to be used by the molding system.
Equipment used: pulping machine, homogenizer, pulp pump, vibrating screen, pulp dredging machine

Molding system
(1) The pulp in the slurry supply tank is fed into the forming machine, absorbed by the vacuum system, the pulp is left on the mold through the equipment to form, and the white water is absorbed by the vacuum pump and driven back to the pool.
(2) After the adsorption of the mold, the transfer mold passes through the air compressor to vent the gas, and the formed product is blown from the forming mold to the transfer mold, and is sent out by the transfer mold.
Equipment used: molding machine, mold, vacuum pump, negative pressure tank, pump, air compressor, mold cleaning machine

Drying system
(1) Natural drying method: The product is dried directly by the weather and natural wind.
(2) Traditional drying: brick tunnel kiln, heat source can choose natural gas, diesel, coal, dry wood,
Liquefied petroleum gas and other heat sources.
(3) New multi-layer drying line: 6-layer metal drying line can save more than 30% of energy compared with transmission drying, and the main heat source is clean energy such as natural gas, diesel oil, liquefied petroleum gas and methanol.