Animal oil refining equipment, the process adopts the international advanced level of “combined deacidification tower”, strong deacidification capacity, by the tower, tower filling, liquid distributor, liquid redistributor, support grid and gas liquid inlet and outlet composition. On the basis of traditional refining, a unique physical refining method is adopted, where the oil is put into the steam through a small hole in the tray tube, and when deodorizing, the free fatty acids contained in the oil are stripped.
Animal fat oil extraction machine adopts vacuum negative pressure cooking technology and newest odor treatment system, with fast cooking speed and high oil yield rate, and the whole process is clean and environmentally friendly, and there is no bad smell.
Henan Glory has engineers team, who can provide different kinds of animal fat oil extraction and refining solutions or turn-key projects.
Animal oil refining equipment, the process adopts the international advanced level of “combined deacidification tower”, strong deacidification capacity, by the tower, tower filling, liquid distributor, liquid redistributor, support grid and gas liquid inlet and outlet composition. On the basis of traditional refining, a unique physical refining method is adopted, where the oil is put into the steam through a small hole in the tray tube, and when deodorizing, the free fatty acids contained in the oil are stripped.
Equipment process: crude oil → degumming → deacidification → decolorization → deodorization → finished oil
Main equipment: spiral plate heat exchanger, gas analyzer, heater, combined deodorization tower, fatty acid trap, cooler, four steam jet pump, thermal oil furnace unit.
Introduction to Host Equipment
Refining pot: used for the hydration, degumming, and deacidification of oils and fats;
Decolorization pot: used for adsorbing decolorized oil;
Deodorization pot: used for high-temperature distillation to remove odors from oil;
Filter: Remove impurities and decolorizing agents from oil and grease;
Vacuum device: equipped with decolorization tank and deodorization tank, generating negative pressure vacuum;
Steam generator: Equipment that heats water to produce steam for distillation.
Cow fat oil refining production line
The cow animal oil refining equipment adopts a horizontal pot body and a micro negative pressure process. The inner wall of the pot body is made of low-alloy manganese steel, which is non stick and non stick to the pot, and the oil color is good.
Production: Customizable
Material: Carbon steel, low alloy manganese steel for inner wall
Refining time: 3.5 hours
Processed oils: cowhide, animal waste, etc
Can produce oils and fats: pet feed oil, edible oil
Characteristics of cow animal oil refining equipment:
- Horizontal pot body, low labor intensity for operators, and large batch processing volume.
- Micro negative pressure process: Compared to negative pressure oil boiling, micro negative pressure control refining is more reasonable and avoids oil color.
- The inner wall of the pot body is made of low-alloy manganese steel, which is non stick and non stick to the pot, and has good oil color.
Chicken and duck oil refining production line
The equipment of the chicken and duck oil refining production line adopts a dry refining process. The heat transfer oil indirectly contacts the oil through the interlayer in the refining pot, and the chicken and duck oil is melted into a solid-liquid mixture under vacuum negative pressure and high temperature conditions of 120 degrees. The oil and slag are separated by an oil residue separation scraper.
Production: 10-20 tons customizable
Materials: stainless steel, carbon steel
Refining time: 2 hours
Processed oilseeds: chicken intestine, duck intestine, leftover duck, animal waste, etc
Can produce oils and fats: pet feed oil, edible animal oil
Refining process:
The chicken and duck oil refining equipment adopts a dry refining process, in which the heat transfer oil is indirectly in contact with the oil through the interlayer in the refining pot. Under vacuum negative pressure and high temperature conditions of 120 degrees, the chicken and duck oil is melted into a solid-liquid mixture, and the oil and slag are separated by an oil residue separation scraper.
characteristic:
Good oil quality: Closed refining process, no contact with the outside world. Dry refining, no moisture in the oil, avoiding oxidation and deterioration, good oil quality, and long storage time.
Fast oil boiling speed: The semi-circular outer coil tube has a large heating area, and the batch oil boiling time is only 2 hours.
Pig fat boiling oil production line
Pig oil refining equipment – animal oil refining equipment quotation Pig oil, as one of the common edible oils, is loved by consumers for its unique taste and nutritional value. However, to extract raw lard into edible oils, professional lard refining equipment is required.
Introduction to lard refining equipment: The lard refining equipment mainly consists of a refining pot, steam generator, vacuum pump, condenser, oil storage tank, etc. These devices work together to complete the extraction process of lard.
The refining pot is used to heat and refine lard, the steam generator provides the required steam, the vacuum pump creates a negative pressure environment, the condenser condenses the steam into liquid oil, and the oil storage tank is used to store the refined lard.
Characteristics of lard refining equipment
- Efficient and energy-saving: Advanced heating technology is adopted to make the lard refining process more efficient and energy-saving, reducing production costs.
- Environmental protection and safety: The entire extraction process is carried out in a sealed environment, reducing exhaust emissions and protecting the environment.
- High degree of automation: The equipment is equipped with an automated control system, which can achieve one click operation and reduce the labor intensity of workers.
Sheep fat refining and oil boiling equipment
Through the R&D team, process design, equipment manufacturing, feeding and testing, and normal operation of the equipment, a highly efficient fully continuous animal meat and oil melting equipment has been designed. The equipment is enclosed, easy to operate, convenient to maintain, and labor-saving. The process adopts a button cabinet automatic control system.
Our company produces a complete set of equipment for melting and refining animal meat fat. Engineering specifications: 1-500T/D
This device is suitable for animal fats and oils such as beef fat, mutton fat, lard, chicken fat, duck fat, and animal organs.
The equipment processing technology involves continuous feeding, and the meat is crushed by a continuous meat crusher before entering a continuous animal meat and fat melting system. The meat fat is melted in the equipment through high-temperature thermal oil heating, and there is a transmission device inside that constantly flips. There is also a continuous slag removal system to remove the slag, which is then pressed by an oil press to maximize oil extraction.
Fish fat refining and oil boiling equipment
Preheating raw materials: Proper preheating of raw materials before refining can reduce energy consumption and increase heating speed.
Accurate temperature control: Accurately controlling the temperature during the refining process according to different raw material and oil requirements can help improve reaction rate and oil yield.
Reasonable mixing: Proper mixing can promote uniform heating of materials and improve reaction efficiency.
Adopting continuous refining process: Compared with traditional batch refining, continuous refining can reduce intermediate pauses and cleaning time, and improve production efficiency.
Recycling waste heat: Utilizing the waste heat generated during the refining process can reduce energy consumption.
Optimized utilization: Reasonable utilization of by-products in the refining process, such as the use of refined waste residue for the production of animal feed.
Data analysis and improvement: By analyzing production data, identify potential problems and improvement points, and continuously optimize the refining process
Boiler free animal oil refining equipment
Boiler free animal oil refining equipment with a pot body length of 4 meters, an inner liner diameter of 1.4 meters, a capacity of 6 tons, and a capacity of up to 3.5 tons when the pot body is loaded to the radius
Boiler free animal oil refining equipment with detailed characteristics of the pot body:
- Size: The oil pot is 4 meters long, the inner diameter is 1.4 meters, and the capacity is 6 tons. When the pot body is filled to the radius, the capacity can reach 3.5 tons.
- Heating method, multifunctional heating, coal, wood, biomass particles, natural gas, oil, methanol, etc. can all be heated.
- Temperature gauge, oil boiling temperature gauge, can observe the degree of oil residue refining and determine the feeding time based on temperature. The temperature gauge of the thermal oil can observe the heating temperature.
- Mirror, which can view the position of the bottom oil, and the mirror above can view the feeding amount.
- Observe the burner and observe the combustion inside the refining pot.
- Furnace door: fuel addition area
- Rinse the mouth and remove any small oil residue from the pot.
This animal oil refining equipment can be customized with a single batch of 500 kilograms to 5 tons of pot body, or a daily production line of 20 tons to 200 tons of refining.
Animal oil refining line
The animal oil refining production line is a complex system involving multiple links and equipment. It is responsible for transforming raw animal oil into high-quality oil that can be consumed by humans through a series of processing and refining processes. This process includes multiple steps such as oil extraction, purification, decolorization, deodorization, etc
The animal oil refining production line is a highly automated system that converts raw animal oil into high-quality, safe, and hygienic edible oil through a series of equipment and technical support. This process not only improves the quality and added value of oils, but also provides people with healthier and more nutritious edible oil choices.
During the operation of the animal oil refining production line, the equipment at each stage needs to be carefully maintained and serviced to ensure its normal operation and extend its service life. Strict control of various parameters and operating standards is also required during the production process to ensure product quality and production safety.
With the continuous advancement of technology and the increasing demand for food safety, the animal oil refining production line is also constantly upgrading and improving. In the future, we can look forward to the emergence of more efficient, environmentally friendly, and safe animal oil refining production lines, providing people with higher quality and healthier edible oil products.
- Purification of oils and fats
The extracted oil needs to be purified to remove impurities and harmful components. This step mainly uses equipment such as centrifuges, filters, and refining machines. Centrifuge separates solid impurities from oil by high-speed rotation; The filter further removes small particles and suspended solids from the oil; Refiners remove harmful components such as moisture, pigments, and odors from oils and fats through heating, vacuum, and other methods.
- Decolorization of oils and fats
The purified oil needs to undergo decolorization treatment to improve its color and transparency. This step is usually completed using a decolorization tower. The decolorization tower is filled with adsorbents such as activated carbon, which can adsorb pigments and impurities in the oil, making it clear and transparent.
- Deodorization of oils and fats
After decolorization, the oil still needs to undergo deodorization treatment to remove any odors and unpleasant odors. This step is usually completed using a deodorization tower. The deodorization tower evaporates the odors and unpleasant odors in the oil through heating and vacuum methods, and collects them through a condenser to obtain high-quality oil products.
- Characteristics of animal oil refining equipment
Animal oil refining equipment is similar to lard refining equipment, but its application fields are more extensive. Animal oil refining equipment can process various animal oils and fats, such as butter, sheep oil, chicken oil, etc. These oils and fats have a wide range of applications in fields such as food, chemicals, and pharmaceuticals. The characteristics of animal oil refining equipment lie in its high efficiency, environmental protection, energy saving, and other aspects. By adopting advanced processes and technologies, animal oil refining equipment can innovatively retain the nutritional components in oil while reducing energy consumption and environmental pollution.
When purchasing lard refining equipment and animal fat refining equipment, the following points should be noted:
- Equipment performance: Firstly, it is necessary to consider whether the performance of the equipment is stable and reliable, and whether it can meet production needs. The performance of the equipment can be evaluated by understanding its process principles, technical parameters, and practical application cases.
- Equipment quality: The quality of equipment is directly related to production efficiency and product quality. Choose equipment with excellent materials and fine craftsmanship to ensure the service life and safety of the equipment.
- After sales service: When purchasing equipment, it is important to understand the manufacturer’s after-sales service policy. Good after-sales service can ensure the normal operation and maintenance of equipment, reducing malfunctions and losses during the production process.
The development trend of lard refining equipment and animal fat refining equipment
With the continuous advancement of technology and the increasing demand for environmental protection, equipment for refining lard and animal fats is also constantly developing. In the future, these devices will pay more attention to environmental protection, energy conservation, and intelligence. By adopting more advanced processes and technologies, these devices will be able to further improve production efficiency and product quality, while reducing energy consumption and environmental pollution.