Hydrogen (oxygen) production by water electrolysis is a process in which water is decomposed into hydrogen and oxygen by using KOH aqueous solution as the electrolyte.

The electrolytic cell is composed of two electrolytic cell groups of bipolar plate type in parallel, the number of cell groups of the two cell groups is equal, and they are shared

The positive transmission plate. Its compact structure and safe operation. The process performance is reliable. Hydrogen and oxygen separators are horizontal and divided

The separation performance is good, the liquid level on both sides of hydrogen and oxygen is balanced and stable, and the height of the device is greatly reduced. Electrolyte forced circulation, electrolytic elimination

The consumption of raw material water is automatically replenished by the plunger pump, and the operating parameters are automatically monitored and controlled.

Alkaline Water Electrolysis Hydrogen Production Machine

How it works:

The equipment uses water electrolysis to produce hydrogen and oxygen to separate them, and controls the level of hydrogen and oxygen to ensure the purity of hydrogen, and then outputs the product hydrogen after washing, gas-liquid separation, cooling, purification, deoxidation, and drying.

Working conditions:

1, this equipment can not be used in the open air, and with rain, lightning and rat protection measures

2, the equipment installation and use of the site must ensure good ventilation, and the top of the place where the equipment is placed should have a ventilation device to ensure that the gas will not accumulate.

3. The ambient temperature of the site should be above 0℃ and below 40℃.

Structural features of Alkaline Water Electrolysis Hydrogen Production Machine:

1. Electrolytic cell: adopting a brand new structural design, low inter electrode voltage, high current density, and low energy consumption per unit of hydrogen production.
2. Gas liquid separator: simplifies the structure of the previous generation product, takes up less space, and has good gas liquid separation effect.
3. Explosion proof requirement: As it is a hydrogen production equipment, all accessories are designed with explosion-proof features. In addition, accessories can be used according to user requirements from designated brands.
4. Box: It can be integrated and spliced, convenient for customers to use, and can also be used as a container.
5. Pipeline: All pipes are made of SS304 stainless steel and connected in a flexible joint form, which changes the disadvantages of traditional flanges being bulky and bulky, reduces the cost of maintenance for users in the later stage, and makes the equipment space more reasonable, reducing the footprint.
6. Purification and drying section: Firstly, it is the first in China to use four-way valves instead of more than ten valves with extremely high failure rates for tower overturning work.
7. Purification and drying section: II. The condensed water in the system is automatically discharged without separate control.
8. Purification and drying section: III. The purity of hydrogen outlet can reach up to 99.999%, and the dew point of hydrogen at atmospheric pressure is as low as -70.